DreamLine DL-6963C-01CL Guía de instalación descargar pdf (Pagina 6)

Rev 1.6

Fig. 3

3. If the Guide rails (03) have been cut, you will need to

reinstall the roller stoppers on each Guide rail on both

sides where it has been cut.

Remove existing stopper. Mark the drilling hole with a

distance of 2” from the cut off edge of the Guide rail.

Drill the new hole using Ø 1/8” drill bit; then fasten the

stopper with screw.

ATTENTION

Do not drill Guide rail throughout, only the first layer.

See Fig. 4 for details

Fig. 4

Ø1/8”

2”

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Sin comentarios

DreamLine DL-6963C-01CL Guía de instalación Pagina 6