
“Enigma-X” Rev.2 Ver.5 08/2013
6
4. Place the Stationary glass (02) on the preinstalled
shower base or threshold and butt it up against the
wall.
(Please note that the Guide rail (03) secured on
the Stationary Glass should face inside the
shower).
Make sure the Stationary glass and the Guide rail
are leveled and aligned with the shower base or
threshold. If a horizontal adjustment is required,
adjust it in the Glass brackets (07).
See Fig. 5 for details.
Fig. 5
5. Outline the position of the Wall bracket (19)
and Guide Rail brackets (08) on the wall.
Set the Stationary glass (02) aside.
Remove the Guide Rail Brackets from the Upper
Guide Rail (03) and the Wall bracket from the
Stationary glass. Place the Wall bracket and
Rail bracket to the outlined positions and mark
the holes for drilling.
See fig. 6 for details.
Fig. 6
A
B
1
3
5
2
4
6
Comentarios a estos manuales