DreamLine DL-6619C-08CL Guía de instalación

ENIGMA X SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any

“Enigma X” Rev.2 Ver.4 04/2013 10 11. Parallel the Stationary glass (02) to the shower base or threshold. Measure the distance from the side wall

“Enigma X” Rev.2 Ver.4 04/2013 11 13. Attach two Rollers (04) to the Glass door (05). Suspend the door by hanging the Rollers onto the Upper guid

“Enigma X” Rev.2 Ver.4 04/2013 12 15. Apply Waterproof silicone at both ends of the Anti-splash threshold (15), around the Guide block (12) and a

“Enigma X” Rev.2 Ver.4 04/2013 13 Product Maintenance To insure long lasting life for your acrylic back walls, wipe them off after each us

DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduseonlyandisnottr

TEL: 866-731-2244 FAX: 866-227-1533 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Doors &

“Enigma X” Rev.2 Ver.4 04/2013 2Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the n

“Enigma X” Rev.2 Ver.4 04/2013 3Detailed Diagram of Shower Door Components Packing List 01 Door stopper 2pcs 11 Hex wrench 3mm, 4mm, 5mm

“Enigma X” Rev.2 Ver.4 04/2013 4Shower Door Installation 1. Measure the distance between two finished walls. This distance is marked as “W”. S

“Enigma X” Rev.2 Ver.4 04/2013 5 3. Install the Upper guide rail (03) to the Stationary glass (02) with the Glass brackets (07) and tighten th

“Enigma X” Rev.2 Ver.4 04/2013 6 4. Place the Stationary glass (02) on the preinstalled shower base or threshold and butt it up against the wall

“Enigma X” Rev.2 Ver.4 04/2013 7 6. Drill the holes for the Wall bracket (19) using Ø 5/16 drill bit and insert the Wall anchors (9b). Drill t

“Enigma X” Rev.2 Ver.4 04/2013 8 8. Place the Guide Block (12) on the shower base or the threshold and place the Stationary glass (02) back in t

“Enigma X” Rev.2 Ver.4 04/2013 9 10. Upper guide rail (03) must be leveled horizontally. Adjust Guide rail bracket (08) using hex key on both en